Translation and analysis of words by ChatGPT artificial intelligence
On this page you can get a detailed analysis of a word or phrase, produced by the best artificial intelligence technology to date:
- how the word is used
- frequency of use
- it is used more often in oral or written speech
- word translation options
- usage examples (several phrases with translation)
- etymology
balanced bilingual - translation to russian
!['''Fig. 2.''' Balanced line in star quad format. This line is intended for use with 4-wire circuits or two 2-wire circuits. It is also used with microphone signals in [[professional audio]].](https://commons.wikimedia.org/wiki/Special:FilePath/Star quad.svg?width=200 "'''Fig. 2.''' Balanced line in star quad format. This line is intended for use with 4-wire circuits or two 2-wire circuits. It is also used with microphone signals in [[professional audio]].")
!['''Fig. 5.''' Microphones connected to [[star quad cable]] join together diametrically opposite conductors to maintain balance. This is different from the usage on 4-wire circuits. The colours in this diagram correspond with the colouring in figure 2.](https://commons.wikimedia.org/wiki/Special:FilePath/Star quad microphone cabling.svg?width=200 "'''Fig. 5.''' Microphones connected to [[star quad cable]] join together diametrically opposite conductors to maintain balance. This is different from the usage on 4-wire circuits. The colours in this diagram correspond with the colouring in figure 2.")
экономика
траектория сбалансированного роста
общая лексика
сбалансированный рост
Definition
Wikipedia
In telecommunications and professional audio, a balanced line or balanced signal pair is a circuit consisting of two conductors of the same type, both of which have equal impedances along their lengths and equal impedances to ground and to other circuits. The primary advantage of the balanced line format is good rejection of common-mode noise and interference when fed to a differential device such as a transformer or differential amplifier.
As prevalent in sound recording and reproduction, balanced lines are referred to as balanced audio.
Common forms of balanced line are twin-lead, used for radio frequency signals and twisted pair, used for lower frequencies. They are to be contrasted to unbalanced lines, such as coaxial cable, which is designed to have its return conductor connected to ground, or circuits whose return conductor actually is ground (see earth-return telegraph). Balanced and unbalanced circuits can be interfaced using a device called a balun.
Circuits driving balanced lines must themselves be balanced to maintain the benefits of balance. This may be achieved by transformer coupling (repeating coils) or by merely balancing the impedance in each conductor.
Lines carrying symmetric signals (those with equal amplitudes but opposite polarities on each leg) are often incorrectly referred to as "balanced", but this is actually differential signalling. Balanced lines and differential signalling are often used together, but they are not the same thing. Differential signalling does not make a line balanced, nor does noise rejection in balanced cables require differential signalling.
